Wednesday, December 25, 2019

The Separation Of Powers Doctrine - 1516 Words

Introduction Law is a system of rules that are enforced through social institutions to govern behavior. (Robertson, Crimes against humanity, 90).Laws can be made by a collective legislature or by a single legislator, resulting in statutes, by the executive through decrees and regulations, or by judges through binding precedent, normally in common jurisdictions. The doctrine of separation of powers The doctrine of the separation of powers is an important principle in Constitutional law. The separation of the legislature is the power to make laws; the executive is the power to administer the laws; and the judiciary is the power to interpret and enforce laws that is constructed through the Commonwealth of Australia. (https://www.murdoch.edu.au/School-of-Law/_document/WA-jurist-documents/WAJ_Vol3_2012_Greenfeld---The-Asymmetry-of-the-Separation-of-Powers.pdf)downloaded on 22/03/2016) Constitution Act (‘the Constitution’).1 The separation of powers doctrine states that each arm of the government should be separate from each other and not exercise the powers or functions of the others.2 Though the Australian government does not strictly comply in the separation of powers because theShow MoreRelatedThe Doctrine Of The Separation Of Power1610 Words   |  7 PagesPlan In this essay I will be explaining how the doctrine of the separation of powers has been compromised to a less extent in the nation like Australia. The first section will constitute in exploring the history and the significance of the separation of the power doctrine. In the second section I will discuss about the compromise of the doctrine, especially between the administrator and the legislature with some good cases held in high court. Besides, some clarification will be provided to explainRead MoreThe Doctrine Of Separation Of Power966 Words   |  4 Pagesthe doctrine of separation of power is a vital element of modern, democratic systems of government. At the same time, it will show the basic points of working process in Australian legal system. Callie Harvey declared that only under the condition that separation of power can be maintained between parts of government, the democratic civilisation can be justly ruled. In fact, the legal system in Australia is divided into three branches, which are based on the doctrine of separation of power, withRead MoreDoctrine of Separation of Powers3203 Words   |  13 Pages1st Internal Assignment Administrative Law The Doctrine of Separation of Power Clive D’souza 13010124119 Division B III Year Introduction: The Government of any country will be the agency or machinery through which the will of the people is realised, expressed and formulated. But for the will of the people to be so expressed, realised and formulated, there needs to be a well organized system which works together, jointly as well as separately for ultimate achievement of the goalRead MoreThe Doctrine Of Separation Of Powers2028 Words   |  9 PagesExplain and critically analyse the doctrine of separation of powers as it applies to the UK constitution. In this essay I will be discussing the doctrine of separation of powers within UK law and to what degree they are functioning within todays government. I intend to analyse the importance and problems which are inherent within the application of the doctrine to the constitution- such as distinguishing between the branches of the doctrine, the issues presented by a constitutional lack of codificationRead MoreThe Separation of Powers Doctrine Essay1040 Words   |  5 PagesThe Separation of Powers Doctrine The Separation of Powers Doctrine can be traced as far back as ancient Greece and essentially the meaning attributed to it is the dividing functions of government between groups with different interests, so that no power in the centre can act without the cooperation of others. However there are many interpretations of the doctrine, one being that of Aristotle, who favoured the division of power according to class interests of theRead MoreThe Importance Of The Doctrine Of The Separation Of Powers Essay1836 Words   |  8 Pagesexamine and explain the importance of the doctrine of the separation of powers in the UK, and to also discuss the arguments concerning the necessity and the purpose of it. The separation of powers is a constitutional principle which limits the powers vested in any person or institution. This means that the power is divided amongst three essential institutions; the executive, the legislature and the judiciary. Each of these bodies should exercise their powers separately and any member of a branch shouldRead MoreDoctrine of the Separation of Powers Essay examples999 Words   |  4 PagesDoctrine of the Separation of Powers Although of great antiquity the modern basis for the doctrine of the separation of powers can be traced back to the writings of commentators such as John Locke, who in one of his books written in 1690 observed that the three organs of government must not get in one hand. The doctrine was further examined by the French jurist Montesquieu who based his exposition on the British constitution of the early 18th Century. In simple termsRead MoreMontesquieu s Doctrine Of The Separation Of Powers Essay2088 Words   |  9 Pages a) Explain Montesquieu’s doctrine of the Separation of Powers. b) Identify and discuss the structure and functions of the individual branches of government under the parliamentary system in Trinidad and Tobago that, when combined, is referred to as a fusion of power. c) Explain the structure and functions of the Judicial arm of government under the parliamentary system in Trinidad and Tobago and discuss why it is critical to maintain its independence from the other branches of government. Read MoreThe Importance of the Doctrine of Separation Powers to Botswanas Public Administration2215 Words   |  9 PagesIMPORTANCE OF THE DOCTRINE OF SEPARATION OF POWERS TO BOTSWANA’S PUBLIC ADMINISTRATION PRACTICES INTRODUCTION All around the world there is need to achieve and maintain peace in the governing of the state. So in order to reinforce this there is the practice of the doctrine of separation of powers in different nations. So this essay is set out to explain in detail the history of the doctrine from where it all started and how it came to be practiced in Botswana. Of course the separation of powers ensures theRead MoreCritically Evaluate the Extent the Doctrine of the Separation of Powers Underpin the Basic Law.1488 Words   |  6 PagesCritically evaluate the extent the doctrine of the separation of powers underpin the Basic Law. ---------------------------------------------------------------------------------------------------- INTRODUCTION According to Wesley Smith, â€Å"The doctrine of separation of powers is a general technique for limiting the ability of government officials to wield excessive powers to the detriment of citizens’ rights. The three types of power (the legislative, executive and judicial) should be distributed

Tuesday, December 17, 2019

Why Women Should Be Drafted and Serve in the U.S. Military...

Tom Pinedo L. Brandenburg English 101, Section #15654 April 22, 2013 Why Women Should be Drafted and Serve in the U.S. Military during Time of War Throughout time women have gone to war along-side their male counterparts without any question as to what role they couldn’t play but rather what contributions they brought with them. History shows that women have played a vital role in military combat and have been very successful filling any role that their male equivalent has played during combat. Military women have led armies into battle, marched as soldiers on to the front line, have lie in wait for the perfect ambush as snipers, acted as spies to obtain vital information for their cause, and placed themselves in harm’s way to protect†¦show more content†¦Donnelly argues that the decision to allow women to serve in combat was being enacted merely to â€Å"achieve a political end in the name of diversity†. Lastly, Heather MacDonald, a writer for the National Review, states that women and men are just too biologically different. She argues The number of women who are the equal to reasonably well-dev eloped men in upper-body strength and who have the same stamina and endurance is vanishingly small.† Furthermore, she states †putting both genders in close quarters will result in a proliferation of sex, favoritism and an increase of sexual assault cases.† Although there are many good arguments which stir up doubt on whether women should be allowed to fight along men in combat, historical fact shows us that women can do a good job, if not a better job, than men in a combat role. A lot of women are not fit for combat just as a lot of men are also not fit for combat, but if a woman can pass all the rigors of boot camp, fulfill the military training in becoming a solider, and has the mental composition to endure the stress of combat, then she deserves the right to serve alongside her fellow solider during time of war. Pentagon figures show that as of Jan. 3, 110 women had been killed in the war in Iraq compared with about 4,300 men. In the Afghanistan campaign, 24 women have been killed compared with more than 1,400 men. ThisShow MoreRelatedU.s. Military Draft History1449 Words   |  6 PagesStates during the Civil War. The Union then conducted their own draft on March 3, 1863. The Northern 1862 draft was an attempt to let states handle their own conscriptions, instead of the old volunteer militia. The next draft took place on September 16, 1940 for World War I and remained in effect continuously until 1973. The president, Woodrow Wilson, decided that â€Å"A draft was needed and nearly 3,000,000 soldiers were drafted following the Service Act of 1917.† (Understanding the U.S. Military DraftRead MoreThe Advantages of Conscription1719 Words   |  7 Pagesa controversial topic of debate in the United States, whether or not our young men and women should be required to serve in the armed forces. There is proof that compulsory military service would be in our nations best interest. It has historically shown to improve military preparedness, and also has evenly balanced the burden of military service. It also helps to instill a sense of duty into those who serve. From an economic standpoint, there are numerous arguments to be made in support of conscriptionRead More conscription Essay1031 Words   |  5 P agesnbsp;nbsp;nbsp;nbsp;nbsp;As the war on terrorism continues more troops in Iraq and Afghanistan are dying every month. The government is struggling to organize the number of soldiers maintaining the opposition in both Afghanistan and Iraq which brings up a popular topic-conscription (mandatory military enlistment). Senator Charles Rangel of New York was the one that introduced the call for the military draft upon the Senate. The draft was revoked and still hasn’t been in affect since the Vietnam War over thirty yearsRead MoreU.s. Department Of Defense1015 Words   |  5 Pages According to the U.S. Department of Defense, the United States military is estimated to contain around 1.4 million active duty personnel. Even in times of peace, having a strong force ready to protect the U.S and its citizens makes living in the U.S better than it already is because we don’t have to worry about being bombed or invaded. But, when the United States takes on a larger operation, the military may need more help. Backup might be needed, so the military may need to call up more forcesRead MoreProblem Identification : Issues With Integration1694 Words   |  7 Pagesprohibited women from being assigned to jobs and specialties directly related to combat below the brigade level, in clandestine and special operations forces, and in roles that were intensely physically demanding. This now transcends to the availability of previously closed specialties, including Marine Corps infantry, to women who can meet a gender neutral standard of performance. 230,000 jobs that wer e previously exclusively for men in the U.S. military, have now been cleared for women to screenRead MoreThe Positives And Negatives Of War923 Words   |  4 PagesStates has been at war with many different rivals. With all of these wars that our country has gone through, there have been many positives and negatives that came with them in the end. The positives range from gaining justice to protecting our country. The negatives range from the number of enemies we’ve made to the number of soldiers and people we’ve lost. Sometimes the positives have outweighed the negatives and sometimes vice-versa. War in any form comes with a price. Should we really keep gamblingRead MoreImportance of Understanding Civil-Military Relations1610 Words   |  7 PagesThe Importance of Understanding Civil-Military Relations â€Å"Some folks are born made to wave the flag, Ooh, they’re red, white and blue†¦ And when the band plays hail to the chief, Ooh, they point the cannon at you, lord†¦ It aint me, it aint me, I aint no senators son, son†¦ It aint me, it aint me; I aint no fortunate one, no†¦ Some folks inherit star spangled eyes, Ooh, they send you down to war, lord†¦ And when you ask them, how much should we give? Ooh, they only answer more! More! More! Yoh†¦ Read MoreLiterature And Law : The Military Draft1102 Words   |  5 PagesAnthony Appiah Mr. Skardal Literature and Law The military draft would require compulsory military service instead of voluntary service. It started in 1940 when volunteering personnel were not enough for the USA army. Thus, men were compulsorily drafted to join the army. Now, the USA no longer compulsorily drafts men to join the army. However, countries such as Switzerland do still draft its men. Conscription in US, also known as the draft, starts after Congress passed a legislation, which hasRead MoreThe Soviet Union Of The Korean War934 Words   |  4 Pagesof approximately 7 million soldiers, sailors, and airmen from America fought in the Korean War, thousands of them lost their lives. But why, you may ask? Well, up until World War II, Korea has been one nation that had belonged to Japan and was known as the Korean Peninsula. After World War II, the winners of the war divided it into two countries. The northern half was ruled by the Soviet Union, while the U.S. took control of the southern half. The line that divided the cou ntry in half was called theRead MorePresident Roosevelt and The Selective Training and Service Act2983 Words   |  12 PagesIt was 1941 and the game of baseball was at an all-time high in the eyes of the American public. During the 1941 major league baseball season the fans of game knew they witnessed two things that would go on to be very special. First Joe DiMaggio reached a feat that very well may never happen again, hitting safely in 56 consecutive games. Then Ted Williams went on to finish the season with a batting average of .406, marking the last time a player has finished the season with a batting average over

Monday, December 9, 2019

Supporting individuals to meet their personal care needs free essay sample

ASSIGNMENT: HSC 2015 Support Individuals to meet personal care needs YOUR NAME †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦. †¦ YOUR PLACE OF WORK †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ DATE STARTED †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.. DATE COMPLETED †¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ Declaration of Authenticity: I declare that this is my own work and that I have not presented the work of any other person as my own. Signed: Date: FINAL ASSESSMENT AS ASSESSOR: Signature: Dates Assignment signed off: Unit 2015 2. 3 –Explain you to report concerns about the safety and hygiene of equipment or facilities used for personal care. The regulations which relate to cleanliness, hygiene and infection control require service providers to: have appropriate procedures for the control of infection and of clinical waste Ensure premises are kept in a good state of repair externally and internally and are fit for the provision of care provide facilities and equipment to address the needs of the service users and keep a record of maintenance of such items ensure staff receive training appropriate to the work they are to perform and provide suitable assistance to staff keep records of incidents detrimental to the health or welfare of the service user. This would include notifying the Care Commission of outbreaks of any infectious diseases which are deemed sufficiently serious by a doctor attending people in the care home. For Assessor 2. 4 Describe ways to ensure the individual can summon help when alone during personal care. There is wide range of personal alarms and other emergency response equipment available to those who live on their own, and they can take many forms . Some might depend on someone being nearby for example in another room or next door Telecare alarms, known as community alarm services, are very useful for people who live alone. They work through a base unit in your home, which is connected to your phone line. You can press a button on the unit or on a pendant that you wear around your neck. This connects you to an operator who can arrange the help you need. Some telecare alarms have movement sensors that can detect if someone has fallen and cannot get up, or leaves a certain area. Those alarms will be activated automatically, so the person does not need to do anything to summon help. Another device worth considering is the mobile phone, these can be programmed with emergency contact numbers, at least one of which could be entered on speed dial, so that all the person at risk has to do is press a certain number, ie, 1, on the keypad. For Assessor LEARNER EXTRA EVIDENCE SHEET [Unit Title: Support Individuals to meet personal care needs] This sheet can be used for Oral Questioning and Professional Discussion Assignment HSC 2015 Support Individuals to meet personal care needs LEARNER FEEDBACK (to be done by Assessor) Assessor Name: __________________ Signature: ___________Date: ___________ EXTRA EVIDENCE REQUIRED? YES NO Assessor Name: _________________Signature: _____________ Date: __________ EXTRA EVIDENCE REQUIRED? YES NO PLEASE SIGN to confirm you have read your feedback sheet. Learner Signature†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ Date†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.. Learner Signature†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦ Date†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.. LEARNER’S FEEDBACK (Learner needs to provide feedback about the assignment namely; what have they learnt from this unit/assignment, what could have been done better)

Sunday, December 1, 2019

Topshop Pricing Strategy and Marketing Plan

Introduction Topshop is a private limited entity which operates within the UK retail and fashion industry. The firm was established in 1964 and its headquarters are situated at London, UK. In its operation the firm deals with provision of a variety of apparels such as footwear, makeup, shoes and accessories (Yahoo Finance 2012).Advertising We will write a custom report sample on Topshop Pricing Strategy and Marketing Plan – Report Example specifically for you for only $16.05 $11/page Learn More To attain an optimal market position, Topshop has incorporated a unique strategy which entails product differentiation. The firm has achieved this by integrating the concept of exclusivity and uniqueness. Topshop achieves this by engaging in innovative and creative designing. As a result, Topshop is able to develop fashion products which are sufficiently differentiated. Its differentiation effectiveness has enabled Topshop to attain an optimal market positi on in the fashion industry despite the intense competition from firms such as ZARA and HM. Additionally, commitment to innovation and creativity has enabled Topshop to align itself with changes in the fashion industry (Yahoo Finance 2012). In an effort to understand the external and internal environment with regard to Topshop, this paper details a comprehensive market audit of the firm. The audit is undertaken by incorporating macro and micro environment analysis models such as the PESTLE analysis, the Porters’ five forces and the SWOT analysis. An internal analysis of the firm is also conducted by evaluating the marketing mix strategies adopted by the firm. Marketing mix The success of a firm in marketing its products and services is dependent on the effectiveness with which it has incorporated its marketing strategies (Kotter Schlesinger 2008).The marketing strategies have to take into account a number of variables such as the product, promotion, price and distribution. Pr oduct strategy Topshop has incorporated product diversification as its product strategy. The firm deals in product lines which are composed of a wide range of apparels and accessories in accordance with the customers’ needs. In its operation, Topshop is focused at ensuring that its products are of high quality, style and convenience. Some of the firm’s main product lines include mainline, boutique, and unique (Topshop 2012). One of the main challenges in the apparels industry emanates from its dynamic nature. The rate of change in the industry is very high. To cope with this issue, Topshop is focused at attaining a high level of creativity and innovation. This has significantly contributed towards the firm’s capability in introducing new products to the market.Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More To ensure that the value of its products is not diluted by ov er-introduction of new products, Topship ensures that only a few pieces of a particular product line are introduced. For example, the firm may only introduce only 300 pieces of a new product which are stocked in specific flagship stores. This strategy is unique in that it contributes towards positioning its products being exclusive, prestigious and scarce (Topshop 2012). Pricing strategy In their purchasing process, consumers are very conscious of product prices. Firms use pricing strategy to communicate the value of their product. In its marketing process, Topshop has adopted premium pricing strategy. The strategy is aimed at communicating the high quality of the firm’s apparels and accessories. Over the years, customers have associated Topshop’s products with value. This has played an important role in the firm’s effort to incorporate premium pricing. Topshop’s premium pricing strategy has succeeded as a result of the unique nature and high quality of i ts products. Promotion strategy Creating sufficient market awareness is one of Topshop’s goal marketing objectives. To achieve this, Topshop has adopted Integrated Marketing Communication (IMC) strategy. The strategy is constituted of various marketing communication techniques such as advertising, sales promotion and public relations. In its advertising strategy, Topshop uses both emerging and traditional marketing communication mediums such as print media. For example, when introducing new products to the market, the firm advertises through mediums such as the local dailies in the UK. Additionally, Topshop also engages in outdoor advertising for example by decorating its vans with its products and unique messages aimed at creating market awareness. Below is an example of some of the firms that the firm utilizes. Advertising We will write a custom report sample on Topshop Pricing Strategy and Marketing Plan – Report Example specifically for you for only $16.05 $11/page Learn More Source: (Topshop 2012).  Web. To create a strong brand relationship, Topshop contracts renowned celebrities to endorse its products. When opening its stores in New York, Topshop contracted Kate Moss, a renowned British model, Jennifer Lopez and Jay Z [renowned music artists] to attend the grand opening (Topshop 2012). Their attendance presented an opportunity for the firm to create market awareness. This is due to the fact that the media would sufficiently publicize the event hence creating brand awareness. Topshop’s management team appreciates the role of information communication technologies in creating market awareness. Consequently, the firm has designed an official website through which it posts its products. Additionally, Topshop also promotes its products through emerging social communication networks such as Facebook. By using social networking sites, Topshop has successfully created a sufficient online community. Distribut ion strategy Upon developing products and services, it is paramount for firms to ensure that customers easily access them. Firms achieve this achieve this by incorporating both direct and indirect distribution methods. Topshop has established a number of outlets in the UK to enhance product accessibility. The outlets are effectively positioned to improve customer accessibility. Topshop has also adopted online marketing. Customers can be able to purchase Topshop’s products online. Online distribution has been effective in ensuring that Topshop markets its products to a wide number of potential customers. Market Environment Analysis Macro-environment analysis Firms do not operate in a vacuum but are affected by changes occurring in the macro-environment. Some of the macro-environment factors affecting firm’s operation include political, economic, technological, social, and legal factors PESTLE analysis of the UK Apparels and accessories industry Political environment Ove r the past decades, the UK government has ensured a high level of political stability. This has played a critical role in promoting investment within the country. Most investors are increasingly considering investing in the UK.Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More The country’s political stability has enabled the UK to be a member of different trading blocs such as the European Union, the G-20 and the Organizational for Economic Co-operation Development. By being a member of such trading blocs, the UK government has been able to provide investors with an opportunity to market their products to a large number of customers. For example, firms such as Topshop can be able to export their products into the member states more cost effectively. This is well illustrated by the fact that the UK has entered into free-trade agreements with other countries such as Norway, Liechtenstein and Switzerland. The economic integration between the UK and other countries presents an opportunity for Topshop to access raw materials member countries cost effectively. Economic environment The 2007/2008 global economic recession adversely affected most world economies as a result of the high rate of globalization that is currently being experienced (Gilligan and Hird 2008). The UK was not shielded from the effects of the recession. Consequently, most economic sectors such as the apparels and accessories were adversely affected. The UK has not fully recovered from the 2008 economic recession. The recession made most consumers to adjust their consumption behavior as a result of decline in their purchasing power. Decline in consumers’ purchasing power emanated from increment in the in the level of unemployment. Approximately 580,000 jobs were lost between 2008 and 2010 in the UK (Bell and Blanchflower 2010). The recession has made consumers to increasingly focus on consumption of necessities rather than luxuries. During this period, a significant proportion of UK consumers considered fashion products such as apparels and other accessories as luxuries than necessities. Currently, the firm’s operations will also be affected by the prevailing euro zone sovereign debt crisis. As a result of the crisis, the UK has experienced an incr ement in the rate of unemployment to 11.2% in 2012 (Cha 2012). It is estimated that the non-food retail sector in the UK will experience the lowest growth as a result of the recession. During 2012, the sector will decline with a margin of 0.5% (Verdict 2012). The recession and the sovereign debt crisis have made consumers unable to purchase highly prices products such as fashion products (Verdict 2012). Therefore, there is a high probability of Topshop experiencing a decline in its sale revenue due to reduction in the consumer’s purchasing power. The economic recession has led to an increment in the degree of uncertainty amongst consumers. This is depicted by the rapid rate at which the consumers’ have reduced the rate of consumption (This Money 2012). Social environment Firms operations are affected by the prevailing social trends. Currently consumers have increasingly become conscious of fashion. This presents an opportunity for Topshop to exploit by designing high q uality, unique and valuable fashion products. To align itself with the prevailing social trends with regard to fashion, Topshop undertakes extensive innovation and designing. Technological environment Topshop can benefit from the numerous innovations with regard to social networking technology. For example, the firm can exploit the social tools such as Facebook, Twitter, Tout and You Tube to interact with its customers. Through these social networking sites, the firm will be able to derive a sufficient volume of market information. Such information can be an important source of market intelligence for the firm. Legal environment Firstly, the government has eliminated all taxes on firms that venture in such zones. Additionally, the government issues a 5-year tax holiday to firms that invest in such zones. Incorporation of tax holidays has played a critical role in improving the attractiveness of the zones to investors. By investing in such economic zones, Topshop can be able to attai n high profitability (Delloite 2011). Competitive analysis: Porter’s five forces Threat of entry The UK high end retail market is characterized by a high threat of entry emanating from entry of large retail chains such as supermarkets. Supermarkets are increasingly diversifying their product range by including diverse apparels and accessories. This presents a major challenge for the firm (Key Note 2001). The high rate of technological innovation especially the internet has made it possible for new entrants to venture the UK high end retail market. New entrants are using the internet to venture in the UK market by undertaking online marketing. To survive in an industry characterized by such a threat, it has become vital for Topshop to incorporate online marketing. Threat of substitute The large number of competitors in the UK fashion industry presents consumers with an opportunity to select from a wide range of products. During periods f economic recession consumers can easily access fashion products from supermarkets and other retail outlets. Supplier bargaining power The suppliers bargaining power is relatively low. Topshop mainly deals with its own branded apparels and accessories. Consequently, the firm is not mainly dependent on suppliers for its finished products. However, the firm outsources raw materials from different sources. For example, the firm accesses its supplies from different countries by importing. As a result of its global reputation, Topshop is able to negotiate for significant discounts. Buyer bargaining power The large number of industry players coupled with the fact that supermarkets are stocking diverse apparels has significantly increased the consumer’s bargaining power (Gilligan and Hird 2008). This arises from the fact that consumers can switch to other apparels and accessories product at a relatively low switching cost. The high consumer bargaining power means that Topshop has to develop customer trust in order to sust ain its sales growth. Additional, the firm has t ensure that it stocks high quality products. This will aid in developing the eve f customer loyalty. The figure below illustrates a summary the industry’s characteristic. Degree of rivalry– The lucrative nature of the industry coupled with the large number of industry players has significantly increased the degree of rivalry in the UK fashion industry. Micro-environment analysis: SWOT analysis of Topshop The chart below illustrates Topshop’s, strengths, weaknesses, opportunities and threats. Strengths Brand image– The firm has managed to nurture its brand image. Creativity and innovation- Top shop is cognizant of the fact that its customers are fashion sensitive. International brand-The firms’ products have been endorsed by celebrities. Customer experience– The high quality of the firm’s products coupled with the in-store atmosphere developed enables the firm to deliver unique custo mer experience. Weaknesses High cost of operation –The firm has a large human resource base and store space which increases cost of operation. Management challenges- The large size of the store and the numerous product lines presents a major challenge for the firm. Opportunities New market segments – Topshop can increase its sales revenue by targeting new customer categories such as the youth. Collaborating with celebrities– The firm can improve its brand image by collaborating with renowned celebrities. International expansion– Topshop can increase the volume of its sales revenue through international expansion. Brand expansion– Expanding its product line y focusing on men clothing will increase the firm’s sales revenue. Threats Competition- The firm faces a major challenge emanating from increased international competition especially from the top designers and fashion icons such as Next Limited, Wearhouse, River Island, Unite Benton, ZAR A and H M. Economic recession- Occurrence of a recession may affect the firm’s profitability due to decline in volume of sales. Conclusion From the above analysis, it is evident that Topshop has been very effective in its operation. Its success has arisen from adherence to quality, innovation, creativity and maintenance of product value. As a result, the firm has been able to attain a high level of customer satisfaction. Topshop has been successful in marketing its apparels and accessories products through formulation and implementation of effective marketing strategies. As a result, the firm has been effective in positioning itself in the market. Despite this, the firm faces numerous challenges emanating from the external environment. To effectively position itself in the market, it is paramount for the firm to continuously conduct a comprehensive market audit. The audit will aid in formulation of effective marketing strategies thus enhancing its competitiveness. Referenc e List Bell, D. Blanchflower, D. 2010, UK unemployment in the great recession.  Web. Cha, A. 2012, European financial crisis has ripple effect on US businesses. Web. Delloitte: Taxation and investment in United Kingdom 2011. Web. Grundy, T. 2006, ‘Rethinking and re-inventing Michael Porter’s five forces model’, Strategic Change, vol. 15, pp. 213-229. Gilligan, C. Hird, M. 2008, International marketing: strategy and management, Taylor and Francis, New York. Key Note: UK clothing footwear 2001 market review,  2001. Web. Kotter, J. Schlesinger, L. 2008, ‘Choosing strategies for change’, Harvard Business Review, vol. 2, pp. 130-150. This Money: Moody’s could downgrade UK’s ‘AAA’ credit rating in early 2013 if the economy fails to shape up. Web. Topshop: Marketing: the Topshop way,  2012. Web. Verdict: UK retail 2012 beyond 2012.  Web. Yahoo Finance: Topshop company profile 2012. Web. This report on Topshop Pricing Strategy and Marketing Plan was written and submitted by user Marcel Heath to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Tuesday, November 26, 2019

Escape From Slavery ; Maya Angelou, Journey of the Heart essays

Escape From Slavery ; Maya Angelou, Journey of the Heart essays I read Escape from Slavery and Maya Angelou Journey of the Heart. I thought both stories had a lot in common but there were some differences. For instance, Escape from Slavery had a different setting, characters, and climax from Journey of the Heart. Escape from Slavery was setting in Philadelphia, Pennsylvania at a hotel, on a steamboat, and on a plantation. Journey of the Heart was setting in the Capitol Building of Washington D.C., Egypt, and Ghana. In Philadelphia, many slaves are trying to escape from their masters. In boxes, dressing up as a white person, and even hiding on trains or ships. At the hotel, one slave and her boys were told to stay put by their master. The slave would whisper help me to free blacks. Luckily, she was saved by a white. At the Capitol Building in Washington D.C. a famous woman speaks at a podium for black rights. The characters in Escape from Slavery were mainly slaves. Their names were Eliza, Dosha, Henry Brown, Passmore Williamson, Jane Johnson, and William Craft. In Journey of the Heart there was mainly one character, Maya Angelou. All the characters in Escape from Slavery were slaves except for Passmore Williamson. Passmore helped Jane Johnson with her escape from slavery. Maya Angelou was a poet, author, activist, entertainer, and a professor. She helped fight for blacks rights. Both stories had similar climaxes. Escape from Slavery ended with the slaves being free and everyone happy. In Journey of the Heart Maya was very happy that she accomplished all her deeds and spoke to people and made her purpose on this planet. These stories couldnt have been said better. The endings were great. In conclusion, Escape from Slavery and Maya Angelou Journey of the Heart had many compares and contras ...

Saturday, November 23, 2019

Attributes in Mathematics

Attributes in Mathematics In mathematics, the word attribute is used to describe a characteristic or feature of an object- usually within a pattern- that allows for grouping of it with other similar objects and is typically used to describe size, shape, or color of objects in a group. The term attribute is taught as early as kindergarten where children are often given a set of attribute blocks of differing colors, sizes, and shapes which the children are asked to sort according to a specific attribute, such as by size, color or shape, then asked to sort again by more than one attribute. In summary, the attribute in math is usually used to describe a geometric pattern  and is used generally throughout the course of mathematic study to define certain traits or characteristics of a group of objects in any given scenario, including the area and measurements of a square or the shape of a football. Common Attributes in Elementary Mathematics When students are introduced to mathematical attributes in kindergarten and first grade, they are primarily expected to understand the concept as it applies to physical objects and the basic physical descriptions of these objects, meaning that size, shape, and color are the most common attributes of early mathematics. Although these basic concepts are later expanded upon in higher mathematics, especially geometry and trigonometry, its important for young mathematicians to grasp the notion that objects can share similar traits and features that can help them sort large groups of objects into smaller, more manageable groupings of objects. Later, especially in higher mathematics, this same principle will be applied to calculating totals of quantifiable attributes between groups of objects like in the example below. Using Attributes to Compare and Group Objects Attributes are especially important in early childhood math lessons, where students must grasp a core understanding of how similar shapes and patterns can help group objects together, where they can then be counted and combined or divided equally into different groups. These core concepts are essential to understanding higher maths, especially in that they provide a basis for simplifying complex equations- from multiplication and division to algebraic and calculus formulas- by observing the patterns and similarities of attributes of particular groups of objects.   Say, for instance, a person had 10 rectangular flower planters that had each had attributes of 12 inches long by 10 inches wide and 5 inches deep. A person would be able to determine that combined surface area of the planters (the length times the width times the number of planters) would equal 600 square inches. On the other hand, if a person had 10 planters that were 12 inches by 10 inches and 20 planters that were 7 inches by 10 inches, the person would have to group the two different sizes of planters by these attributes in order to quickly determine how much surface area all the planters have between them. The formula, therefore, would read (10 X 12 inches X 10 inches) (20 X 7 inches X 10 inches) because the two groups total surface area must be calculated separately since their quantities and sizes differ.

Thursday, November 21, 2019

Potent and specific genetic interference by double-stranded RNA in Essay

Potent and specific genetic interference by double-stranded RNA in Caenorhabditis elegans - Essay Example Notably, this reflects limited interference activity. To achieve a commendable effect, there should be a high dose of the injected RNA. In an endogenous activity, an antisense-sense mixture has the capacity to produce interference that is very effective. In the development of a dsRNA (double-stranded RNA), the evident feature is the potency of the antisense-sense mixture in the interfering activity. Placing the double-stranded structure in cis has no effect on the potent activity of the interference. That is, double-strand sequences that are positioned on level 3 or 5 of a single-strand segment are not able to trigger interference. Using unc-54, fem-1 and hlh-1 to assess the target uniqueness of the effects of dsRNA, the results include (1) progeny broods with a null-mutant phenotype are produced and (2) the single RNA threads with no important interference. At cellular levels, the effects of interference of dsRNA can also be examined. Fractions of the Derived fluorescent protein (GFP) decrease when they are injected with dsRNA and the same is explained by in the figure above and

Tuesday, November 19, 2019

Commercial Realities in Project Management Coursework

Commercial Realities in Project Management - Coursework Example .....................................................................................6 Swot analysis ...........................................................................................................................9 Conclusion ..............................................................................................................................12 Recommendation .....................................................................................................................13 Introduction Project management is a discipline that involves management of resources in a project to achieve the set goals and objectives. Project managers’ plan, organizes, and controls all the activities of the project to realise the set goals. The project must be appraised by use of various methods to determine its viability. Somalia is a country that does not a centre of training its cadets. There is a lot of expenditure in training the cadets outside the country. Somalia and xyz defence team wants to initiate F-15, Tornado and Typhoon Aircrafts Maintenance Training Facility and complete training program. There is demand for the facility from Somalia and other foreign nations. This project will involve large sums of money, and many logistics must be put in place. There will be many interested parties involved, and therefore there will be many issues arising. These activities includes; purchase, supply, finance and contract management issues. Somalia requires an in-depth analysis of the project to assess it viability. In the process of establishing F-15, Tornado and Typhoon Aircrafts Maintenance Training Facility and complete training program, there will be many contacts between Somalia and other firms. The procurement firms must ensure that the goods procured are of the right quality. Supply of low quality goods will amount to breach of contract. If the construction is done with the low quality materials, it is the procurement firm to take the losses. Manage ment is a doctrine that is useful in the successful running of the business organization. Through management, the various business owners are able to delegate some authority to their subordinates. This is necessary enough to ensure the effective running of the business or project. A project entails many different activities that are all correlated in ensuring the success of the overall business endeavour. Duties, challenges, obligations are assigned to the employees of any organizational setting. Delegation is an essential part in the management. Project management is a part of management that concentrates on the effective management of a project until its completion. Through technological usage of resources that are not costly and cheap in the end one is able to make skilful use of the available resources to put into practice the application of the project. Proper monitoring of all the transactions that transpire during the project will ensure its overall success. Evaluation tools are in existence in the establishment of viability of any business portfolio. The use of Net Present Value, IRR, and other mathematical tools enable one to establish mathematically the viability of any business endeavour. In most government projects, the government is entitled to inspect all the materials. Many potential disputes are likely to arise since it is an enormous investment. These must be handled with clear laws governing the contracts. The project will be evaluated by use of various methods to ascertain its viability. Since it is a capital-intensive project,

Sunday, November 17, 2019

The role, purpose and responsibilities of a chosen uniformed public service army Essay Example for Free

The role, purpose and responsibilities of a chosen uniformed public service army Essay Having respect for one another in the army is an advantage as it boosts thoughtfulness, demands decency, and recognizes the value of everyone Respect is the root source for people living in harmony and being consideration toward others. Respecting one another shows that you have put aside your differences such as race, color, sexuality and religion. Respect is earned and isn’t given. In order to gain someone respect you must show them a positive character. Being able to be loyalty is a main attribute as in the battle field you will need to have each other’s back. For example if one of your men has injured them self you will need to make him priority and stop fighting and put attention on him, because his life is more important than fighting with opponent. Being loyal also means not to turn your back in one of your team mates will they need your help. For example if your team mates have not got his army shoes you could maybe lead him some so that you both are able to work on the front line. Also if you team mate has ran out of bullets supplying him with extras that you may have is involved in loyalty. Courage I feel is a key skill for a solider, you will need to be able to face tough situation and know how to deal with them using the appropriate action. Courage will be need to overcome tough, painful and difficult circumstances. Courage is fear holding on a minute longer -Gen. George Patton- http://www.quotedb.com/quotes/4120 09/10/12 The role of the army is to protect the country. The army’s main reasonability is to look out for the citizens that live in the United Kingdom and ensure their safety. They will have to protect them from terrorism and wars. These people are highly trained individuals who have over gone a series of test physically, mental and social side of it in order to get in the army. Everyone who joins the army’s needs to have good fitness whether they are applying for the cook’s role or the front line as everyone in the army are so ldiers first Secondly they have a responsibility towards the United Nations, European Union and the NATO. These larger scaled organizations are formed in order to promote peace, safety and protection to the different countries part of the organization. Part of being in these different organizations they United Kingdom have committed to send any sorts of military equipment or troops when and where needed. The troops who are  called from different countries come together in the needed country in order to help their army out in what where they need. Such as help to patrol, help to stabilize the army, use the different equipment and to create a effective and efficient team Furthermore the United Kingdom’s army may go into different countries to help them. Our British army is currently in Iran. They are there in order to teach them how to govern the country. Help them by stabilizing their army and economy. Teaching them the basics of discipline so that they benefits and enforce this in their country. However some countries dislike this as they feel that the British troop are interfering with their country and feel they taking over. On the other hand some people feel it is beneficial as it helps them become independent and are able to stand alone. The army also steps in in major incidents. When the London 7/7 took place all the emergency services and the army came together so that they were able to calm the public and get everything back on track as soon as possible.

Thursday, November 14, 2019

Scarlett Letter :: essays research papers

Pearl and the Spice of Life Really good salsa has lots of zesty vegetables and spices to make it good. But what if the spiciness of the salsa was taken away? It would just be tomato sauce. Pearl is the spice of The Scarlet Letter by Nathaniel Hawthorne. If her character was not present, the book would have a completely different flavor. In his essay entitled â€Å"The Genius of The Scarlet Letter,† Anthony Trollope states, â€Å"Pearl is miraculous,-speaking, acting, thinking like an elf,-and is therefore, I think, a drawback rather than an aid. The desolation of the woman, too, would have been more perfect without the child† (Trollope 243). Trollope’s point is well made, however the absence of Pearl would have made The Scarlet Letter an entirely different story. Without Pearl there would have been no proof of Hester’s adultery, and she might have become more depressed, even sinned more. However, if Pearl had been a more normal and obedient child, she would have been more well liked by readers. The most drastic change that would have been made in the book in the absence of Pearl would be that it would no longer have been called The Scarlet Letter. The reason for this being that without Pearl, there would have been no proof that Hester had committed adultery. Therefore, no one would have known and there would have been no punishment. Instead, Hester would have gone through the same guilt and internal battle as the minister, Reverend Dimmesdale. The reason that Dimmesdale is so tortured inside is because of the incredible feeling of guilt that he has because of having never taken blame or punishment for his sin. If Hester took no punishment, she would feel that same torture inside. But Pearl is present, so she is proof of Hester’s adultery. Hawthorne says it best when he states, â€Å"God, as a direct consequence of sin which man thus punished, had given her a lovely child† (82). Hester’s punishment was the consequence of having a child. Pearl is not only the proof of Hester’s adultery, she is also the thing that keeps Hester going. Hester may have fallen into a depression and eventually died, but Hester has to keep sewing, keep getting out of bed in the morning, and keep taking care of herself because she has someone else to take care of too. Hester’s feelings about Pearl are revealed when Hawthorne states, â€Å"But she named the infant ‘Pearl,’ as being of great price,-purchased with all she had,-her mother’s only treasure!† (82).

Tuesday, November 12, 2019

Unions in Canada

Abstract Unions have been struggling in Canada’s current economy. The rate of workers joining unions is on a downward slide, noticeably so in the public sector, despite the fact the unions helped to stabilize and grow the economy in the past. Due to the current economic turmoil, unions have had to resort to strategies that will allow them to lower operating costs and compete with global competitors. Although unions are facing difficulties, they are still of benefit to workers.History of Unions in Canada and their Effects on the Economy Unions have been apart of Canadian history since the early 1800’s. Records show tradesmen in the Maritimes having unions during the war of 1812 despite such organizations not being legalized in Canada until 1872 (Maple Leaf Web). Approximately 31% of all workers in Canada belong to unions (United Food and Commercial Workers Canada)(Canadian Labour Congress).The public sector – including schools, hospitals, and crown corporations â €“ have a unionization rate of 71%, while in the private sector the rate is 16% and falling (Canadian Broadcasting Corporation, 2012). Historians have credited the growth in Canada’s middle-class to unions because they offered higher wages and job security, which allowed for members to have extra income to spend on commodities such houses, clothing, cars, etcetera. This increased the demand for those items, and helped grow and stabilize the economy (United Food and Commercial Workers Canada).Although unions were of benefit in the past, membership has been on a 30-year decline (Figure 1) and the usefulness of such organizations has come into question due to unionized workers pay and benefits lagging behind workers who are non-unionized (Canadian Broadcasting Corporation, 2012). This report will cover the history of unions in Canada, and their impact on the Canadian economy. The factors covered suggest that unions are still of benefit at the present. History of Unions in Ca nada The Canadian union movement was influenced by Britain and the United States (Class Net)(Maple Leaf Web).British tradesmen brought over the tradition of the organizations and caused several British unions to open branches in Canada. However, unions weren’t legalized in Canada until 1872 after the Toronto Printers’ Strike (workers were protesting for nine-hour work days), and the first national labour organization was the Trades and Labour Congress of Canada (TLC), which was formed in 1873 (Maple Leaf Web). Early legislation of unions was derived from the British structure, while the current legislation has been developed from post-World War 2 United States unions (Class Net).Members have historically been those in the trades – electricians, miners, construction workers, etc -, nursing, teaching, journalism, artistic fields, and athletics (United Food and Commercial Workers Canada). Unions and the Economy In the past unions helped stabilize and grow the econo my by decreasing the divide between rich and poor. In current economic times, unionization rates have fallen (Figure 1) causing the pay difference between unionized and non-unionized workers to grow (Figure 2) (Mine Mill 598).This has resulted in workers not having the excess income to spend to help the economy recover, or the money to pay extra taxes to support public services such as schools, roads, and health care. Despite this difference, United Food and Commercial Workers Canada (UFCW) has stated that even workers who have never belonged to a union have benefited by their existence, and that Canada is one of the top five most prosperous countries in the world because of them (United Food and Commercial Workers Canada).The Canadian Labour Congress (CLC) states that union members earn almost $7 per hour more then non-unionized workers, and that number increases to $7. 95 per hour for many women. They also state that 88. 5% of members receive benefits not related to wage, such as prescription drugs and dental plans, and that 92. 3% of large workplaces have pension plans, where as only 68. 4% of non-unionized workplaces have them. For small, non-unionized workplaces, 31. 1% offered health-related benefits, and only 12. 5% had pension plans. In small workplaces that were unionized, those numbers climb to 47. 6% and 34. % respectively (Canadian Labour Congress). However, due to global rivals in various fields of work operating at lower costs, Canadian unions have begun to implement two-tier wages; a technique that was used in the 1980s and 1990s. It involves workers under new contracts to start a lower wages then previously contracted members. New workers will be on par with existing workers after 10 years, though some industries – the auto manufacturing industry, for example – have fought to ensure new workers never converge with current employees wages. It is believed such strategies will be common in the future (Globe and Mail, 2012).Conclusion Unions were extremely beneficial for workers when they were first introduced due to the bonuses they offered, increased wages, job security, and the effects such extras would have on the over all economy. In the current economy unions are viewed as unneeded, which has stemmed the decline in unionization rates and prevented the organizations from being as useful as they could be. Unions are facing struggles in the current economy, but despite such troubles they are still of use in the present because their impact reaches further then just their members, and helps to stabilize the economy.References Maple Leaf Web. History of Unions in Canada. Retrieved From: http://www. mapleleafweb. com/old/education/spotlight/issue_51/history. html United Food and Commercial Workers Canada (UFCW). Facts About Unions. Retrieved from: http://www. ufcw. ca/index. php? option=com_content&view=article&id=29&Itemid=49&lang=en#link3 Canadian Labour Congress (CLC). Union Advantage. Retrieved from: http:// www. canadianlabour. ca/about-clc/union-advantage Canadian Broadcast Corporation (CBC). (2012). Unions on Decline in Private Sector.Retrieved from: http://www. cbc. ca/news/canada/story/2012/09/02/unions-labour-canada-decline. html Class Net. History and Development of Unions in Canada. Retrieved from: https://classnet. wcdsb. ca/sec/StB/Gr12/History/law/Shared%20Documents/Labour%20Law/(A)HistoryandDevelopmentofUNIONSinCanada. pdf Mine Mill 598. (2009). Unionization Fact Sheet. Retrieved from: http://www. minemill598. com/PDF/editorials/UNIONIZATION_FactSheets_Sept2009. pdf Globe and Mail. (2012). Two-Tier Wage Scales on the Increase in Canada.

Saturday, November 9, 2019

A Pattern in The Least Successful Startup

A year ago I noticed a pattern in the least successful startups we'd funded: they all seemed hard to talk to. It felt as if there was some kind of wall between us. I could never quite tell if they understood what I was saying. This caught my attention because earlier we'd noticed a pattern among the most successful startups, and it seemed to hinge on a different quality. We found the startups that did best were the ones with the sort of founders about whom we'd say â€Å"they can take care of themselves.†The startups that do best are fire-and-forget in the sense that all you have to do is give them a lead, and they'll close it, whatever type of lead it is. When they're raising money, for example, you can do the initial intros knowing that if you wanted to you could stop thinking about it at that point. You won't have to babysit the round to make sure it happens. That type of founder is going to come back with the money; the only question is how much on what terms. It seemed od d that the outliers at the two ends of the spectrum could be detected by what appeared to be unrelated tests.You'd expect that if the founders at one end were distinguished by the presence of quality x, at the other end they'd be distinguished by lack of x. Was there some kind of inverse relation between resourcefulness and being hard to talk to? It turns out there is, and the key to the mystery is the old adage â€Å"a word to the wise is sufficient. † Because this phrase is not only overused, but overused in an indirect way (by prepending the subject to some advice), most people who've heard it don't know what it means.What it means is that if someone is wise, all you have to do is say one word to them, and they'll understand immediately. You don't have to explain in detail; they'll chase down all the implications. In much the same way that all you have to do is give the right sort of founder a one line intro to a VC, and he'll chase down the money. That's the connection. U nderstanding all the implications—even the inconvenient implications—of what someone tells you is a subset of resourcefulness. It's conversational resourcefulness.Like real world resourcefulness, conversational resourcefulness often means doing things you don't want to. Chasing down all the implications of what's said to you can sometimes lead to uncomfortable conclusions. The best word to describe the failure to do so is probably â€Å"denial,† though that seems a bit too narrow. A better way to describe the situation would be to say that the unsuccessful founders had the sort of conservatism that comes from weakness. They traversed idea space as gingerly as a very old person traverses the physical world. The unsuccessful founders weren't stupid.Intellectually they were as capable as the successful founders of following all the implications of what one said to them. They just weren't eager to. So being hard to talk to was not what was killing the unsuccessful s tartups. It was a sign of an underlying lack of resourcefulness. That's what was killing them. As well as failing to chase down the implications of what was said to them, the unsuccessful founders would also fail to chase down funding, and users, and sources of new ideas. But the most immediate evidence I had that something was amiss was that I couldn't talk to them.

Thursday, November 7, 2019

Introduction to Electricity and Electronics

Introduction to Electricity and Electronics Electricity is a form of energy involving the flow of electrons.  All matter is made up of atoms, which has a center called a nucleus. The nucleus contains positively charged particles called protons and uncharged particles called neutrons. The nucleus of an atom is surrounded by negatively charged particles called electrons. The negative charge of an electron is equal to the positive charge of a proton, and the number of electrons in an atom is usually equal to the number of protons. When the balancing force between protons and electrons is upset by an outside force, an atom may gain or lose an electron. And when electrons are lost from an atom, the free movement of these electrons constitutes an electric current. Humans and electricity Electricity is a basic part of nature and it is one of our most widely used forms of energy. Humans get electricity, which is a secondary energy source, from the conversion of other sources of energy, like coal, natural gas, oil and nuclear power. The original natural sources of electricity are called primary sources. Many cities and towns were built alongside waterfalls (a primary source of mechanical energy) that turned  water wheels  to perform work. And before electricity generation began slightly over 100 years ago, houses were lit with kerosene lamps, food was cooled in iceboxes, and rooms were warmed by wood-burning or coal-burning stoves. Beginning with  Benjamin Franklins  experiment with a kite one stormy night in Philadelphia, the principles of electricity gradually became understood. In the mid-1800s, everyones life changed with the invention of the electric  light bulb. Prior to 1879, electricity had been used in arc lights for outdoor lighting. The lightbulbs invention used electricity to bring indoor lighting to our homes. Generating electricity An electric generator (Long ago, a machine that generated electricity was named dynamo todays preferred term is generator) is a device for converting mechanical energy into electrical energy. The process is based on the relationship between magnetism and electricity. When a wire or any other electrically conductive material moves across a magnetic field, an electric current occurs in the wire. The large generators used by the electric utility industry have a stationary conductor. A magnet attached to the end of a rotating shaft is positioned inside a stationary conducting ring that is wrapped with a long, continuous piece of wire. When the magnet rotates, it induces a small electric current in each section of wire as it passes. Each section of wire constitutes a small, separate electric conductor. All the small currents of individual sections add up to one current of considerable size. This current is what is used for electric power. An electric utility power station uses either a turbine, engine, water wheel, or other similar machine to drive an electric generator or device that converts mechanical or chemical energy to electricity. Steam turbines, internal-combustion engines, gas combustion turbines, water turbines, and wind turbines are the most common methods to generate electricity.

Tuesday, November 5, 2019

Knoxville Campaign in the Civil War

Knoxville Campaign in the Civil War Knoxville Campaign - Conflict Dates: The Knoxville Campaign was fought in November and December 1863, during the American Civil War (1861-1865). Armies Commanders: Union Major General Ambrose BurnsideArmy of the Ohio (3 corps, approximately 20,000 men) Confederate Lieutenant General James Longstreetapprox. 15,000-20,000 men Knoxville Campaign - Background: Having been relieved from command of the Army of the Potomac following his defeat at the Battle of Fredericksburg in December 1862, Major General Ambrose Burnside was transferred west to head the Department of the Ohio in March 1863.  In this new post, he came under pressure from President Abraham Lincoln to push into East Tennessee as the region had long been a stronghold of pro-Union sentiment.  Devising a plan to advance from his base at Cincinnati with IX and XXIII Corps, Burnside was forced to delay when the former received orders to travel southwest to aid Major General Ulysses S. Grants siege of Vicksburg.  Compelled to await IX Corps return before attacking in force, he instead dispatched cavalry under Brigadier General William P. Sanders to raid in the direction of Knoxville. Striking in mid-June, Sanders command succeeded in inflicting damage on the railroads around Knoxville and frustrating Confederate commander Major General Simon B. Buckner.  With the return of IX Corps, Burnside commenced his advance in August.  Unwilling to directly attack the Confederate defenses in the Cumberland Gap, he swung his command to the west and proceeded over mountain roads.  As Union troops moved into the region, Buckner received orders to move south to aid General Braxton Braggs Chickamauga Campaign.  Leaving a single brigade to guard the Cumberland Gap, he departed East Tennessee with remainder of his command.  As a result, Burnside succeeded in occupying Knoxville on September 3 without a fight.  A few days later, his men forced the surrender of those Confederate troops guarding the Cumberland Gap. Knoxville Campaign - The Situation Changes: As Burnside moved to consolidate his position, he sent some reinforcements south to aid Major General William Rosecrans who was pressing into northern Georgia.  In late September, Burnside won a minor victory at Blountville and began moving the bulk of his forces toward Chattanooga.  As Burnside campaigned in East Tennessee, Rosecrans was badly defeated at Chickamauga and pursued back to Chattanooga by Bragg.  Caught with his command strung out between Knoxville and Chattanooga, Burnside concentrated the bulk of his men at Sweetwater and sought instructions on how he could aid Rosecrans Army of the Cumberland which was under siege by Bragg.  During this period, his rear was threatened by Confederate forces in southwestern Virginia.  Backtracking with some of his men, Burnside defeated Brigadier General John S. Williams at Blue Spring on October 10. Ordered to hold his position unless Rosecrans called for aid, Burnside remained in East Tennessee.  Later in the month, Grant arrived with reinforcements and relieved the siege of Chattanooga.  As these events were unfolding, dissent spread through Braggs Army of Tennessee as many of his subordinates were unhappy with his leadership.  To rectify the situation, President Jefferson Davis arrived to meet with the parties involved.  While there, he suggested that Lieutenant General James Longstreets corps, which had arrived from General Robert E. Lees Army of Northern Virginia in time for Chickamauga, be sent against Burnside and Knoxville.  Longstreet protested this order as he felt he possessed insufficient men for the mission and the departure of his corps would weaken the overall Confederate position at Chattanooga.  Overruled, he received orders to move north with support provided by 5,000 cavalry under Major General Joseph Wheeler.  Ã‚   Knoxville Campaign - Pursuit to Knoxville: Alerted to Confederate intentions, Lincoln and Grant were initially concerned about Burnsides exposed position.  Calming their fears, he successfully argued for a plan that would see his men slowly withdraw towards Knoxville and prevent Longstreet from taking part in future fighting around Chattanooga.  Moving out during the first week of November, Longstreet had hoped to use rail transport as far as Sweetwater.  This proved complicated as trains ran late, insufficient fuel was available, and many locomotives lacked the power to climb the steeper grades in the mountains.  As a result, it was not until November 12 that his men were concentrated at their destination.   Crossing the Tennessee River two days later, Longstreet commenced his pursuit of the retreating Burnside.  On November 16, the two sides met at the key crossroads of Campbells Station.  Though the Confederates attempted a double envelopment, Union troops succeeded in holding their position and repulsing Longstreets attacks.  Withdrawing later in the day, Burnside reached the safety of Knoxvilles fortifications the next day.  During his absence, these had been enhanced under the eye of engineer Captain Orlando Poe.  In an effort to gain more time for enhancing the citys defenses, Sanders and his cavalry engaged the Confederates in a delaying action on November 18.  Though successful, Sanders was mortally wounded in the fighting. Knoxville Campaign - Assaulting the City: Arriving outside the city, Longstreet commenced a siege despite lacking heavy guns.  Though he planned to assault Burnsides works on November 20, he elected to delay to await reinforcements led by Brigadier General Bushrod Johnson.  The postponement frustrated his officers as they recognized that every hour that passed allowed Union forces to strengthen their fortifications.  Assessing the citys defenses, Longstreet proposed an assault against Fort Sanders for November 29.  Located northwest of Knoxville, the fort extended out from the main defensive line and was seen a weak point in the Union defenses.  Despite its placement, the fort was situated atop a hill and fronted by wire obstacles and deep ditch.   On the night of November 28/29, Longstreet assembled around 4,000 men below Fort Sanders.  It was his intention to have them surprise the defenders and storm the fort shortly before dawn.  Preceded by a brief artillery bombardment, three Confederate brigades advanced as planned.  Briefly slowed by the wire entanglements, they pressed on towards the forts walls.  Reaching the ditch, the attack broke down as the Confederates, lacking ladders, were unable to scale the forts steep walls.  Though covering fire pinned down some of the Union defenders, Confederate forces in the ditch and surrounding areas quickly sustained heavy losses.  After approximately twenty minutes, Longstreet abandoned the attack having sustained 813 casualties against only 13 for Burnside. Knoxville Campaign - Longstreet Departs: As Longstreet debated his options, word arrived that Bragg had been crushed at the Battle of Chattanooga and forced to retreat south.  With the Army of Tennessee badly wounded, he soon received orders to march south to reinforce Bragg.  Believing these orders to be  impracticable he instead proposed remaining around Knoxville for a long as possible to prevent Burnside from joining Grant for a combined offensive against Bragg.  This proved effective as Grant felt compelled to dispatch Major General William T. Sherman to reinforce Knoxville.  Made aware of this movement, Longstreet abandoned his siege and withdrew northeast to Rogersville with an eye to eventually returning to Virginia. Reinforced at Knoxville, Burnside sent his chief of staff, Major General John Parke, in pursuit of the enemy with around 12,000 men.  On December 14, Parkes cavalry, led by Brigadier General James M. Shackelford was attacked by Longstreet at the Battle of Beans Station.  Mounting a tenacious defense, they held through the day and withdrew only when enemy reinforcements arrived.  Retreating to Blains Cross Roads, Union troops quickly built field fortifications.  Assessing these the next morning, Longstreet elected not to attack and continued withdrawing northeast. Knoxville Campaign - Aftermath: With the end of the standoff at Blains Cross Roads, the Knoxville Campaign came to an end.  Moving into northeast Tennessee, Longstreets men went into winter quarters.  They remained in the region until spring when they rejoined Lee in time for the Battle of the Wilderness.  A defeat for the Confederates, the campaign saw Longstreet fail as an independent commander despite an established track record leading his corps.  Conversely, the campaign helped reestablish Burnsides reputation after the debacle at Fredericksburg.  Brought east in the spring, he led IX Corps during Grants Overland Campaign.  Burnside remained in this position until being relieved in August following the Union defeat at the Battle of the Crater during the Siege of Petersburg.  Ã‚   Selected Sources Knoxville: A Near-Death ExperienceHistory of War: Battle of KnoxvilleCWSAC Battle Summaries: Fort Sanders

Sunday, November 3, 2019

Externality Assignment Example | Topics and Well Written Essays - 1000 words

Externality - Assignment Example When economies have competition and no externalities, the markets will allocate resources in order to maximize the surplus available. However, when or if these conditions are not met, market failure may occur, as the market has not achieved the optimal outcome. If the parties involved can bargain without cost over the allocated resources, then the private market will always solve the problem of externalities. However, we realize this is not the case in all circumstances and therefore may require government means of intervention to correct the imbalance. Market failures in this case are failures only in the limited sense that they involve transaction costs that can be weakened by substituting internal organization for market exchange. (Unknown Author. â€Å"Market Failures and Externalities.† BasicEconomics.info). Market failures are affected by all of the following: static markets, contractual incompleteness, strategic misrepresentation risk, information processing effects, an d institutional adaptations. (Williamson Oliver E., The American Economic Review). These influences all play an integral role in the steps to market failure. The justification for government intervention usually comes about as a result of market failure within a particular market. This government intervention is implemented through the means of public policy, taxes, subsidies, bailouts, regulations, and wage and price controls. The government may also include attempts to correct market failure through the re-allocation of resources. A prime example of this would be the recent government bailouts and stimulus packages put together by Obama and Congress. There are several different perspectives about the cause of market failure, but market failure will always occur if there the market is ‘monopolized’ or a small group of businesses hold significant power. Some market failures are also due to the nature of the good or service being a public good. Negative externalities aff ect social cost much greater than the private cost. A great example of this would be the seat belt law and helmet law for motorcyclists. There are several times when we have sat in a car and wondered why should I put my seat belt on? I am only riding around the corner†¦ People have often questioned whether the government has the right to tell someone to put on their seat belt or wear a helmet when riding. The negative externality is derived from the scientific data that shows us that people involved in automobile accidents that wear seat belts and helmets have much less greater injuries than those that do not. These safety devises can greatly reduce fatalities associated with the incidents. Society as a whole, often times must foot the bill of these injuries through tax dollars because many of the people involved in these crashes do not have enough insurance. When you add medical bills, missed work, disabilities, and foster care- the social burden can become quite great. Also a lot of the funding that goes behind programs is tied to safety compliance. (Unknown Author. Cals.ncsu.edu) A great example of a positive externality would be the new green energy initiative that is taking place. In the past couple of years, the U.S. government has dramatically stressed the importance of fuel independence from the Middle East, and has sought ways

Thursday, October 31, 2019

Answer the questions Movie Review Example | Topics and Well Written Essays - 500 words

Answer the questions - Movie Review Example In Waking Life, the movie is about an individual who has founds numerous avenues through the dreams of individuals. The principal actor easily walks through the dreams of people to assess their thoughts. The movie tries to seek to find out answers where other individuals are not seeking for answers. An interesting film that has entertaining animated characters that spend time discussing theories and ideas. The main actor is concerned with determining the difference between dreams. The subconscious mind is a powerful tool in the head of many individuals. Most people believe that the mind is the place where most different things happen. It is in the mind that most individuals experience intuitions. In addition to, it is in the mind that people exist beyond their physical bodies. Cobb has a strong connection with his dreams and his subconscious mind. The dreams in the movie inception indicate the alertness of the most of the actors in the movie. The subconscious mind of Cobb comes from his subconscious mind. The brain is a powerful tool that can interpret information. The information the brain uses it gets to make sense of various sources. Thieves in the movie are aware of the actions of that are happening. In the movie Inception, there is some reality shown by the thieves. 2. Dream architecture and dream logic are profoundly exhibited in the two movies. Dream architecture helps the mind to create myths in the mind of humans. The fallacies are well incorporated into the movies, and they motivate the viewers to want to see more (Som.org). The producers use the fallacies to create a mental picture to the audiences. The use of dream architecture to constructs images in the mind of the viewers. In the world, there are places that are the producer uses illusion to create messages in the mind of the viewers. The brain processes information for the mind to interpret. This factor enables the production of inception and waking life. The

Tuesday, October 29, 2019

Critical Thinking Questions Assignment Example | Topics and Well Written Essays - 1000 words

Critical Thinking Questions - Assignment Example A reference source used in a paper must be credible to be conclusive and the authority it possesses makes the source more credible and usable. Primary sources give first-hand information about the subject of research while Secondary Sources give information that has been discussed elsewhere. However Primary and Secondary sources are relative terms and can be described as per the usage of the information. It is described that â€Å"a fallacy is usually incorrect reasoning in argumentation resulting in a misconception.† A logical fallacy is one which is a logical flaw in the argument due to which the argument becomes invalid. A post hoc is a good example of logical fallacy in which people try to link events and deduce conclusions with out considering the other relevant factors. A typical essay includes thesis statement, introductions, body paragraphs and conclusion. The introduction of the essay must be deductive in nature and presented precisely. A good introduction includes to pic of the essay and the background information regarding it. The thesis statement is usually presented in one single statement and author shows his point of view that will be later proved in the body paragraphs through a logical chain of arguments. A thesis statement never asks a question but shows a point of view. A conclusion comprises of a paragraph and concludes the arguments presented in the body paragraphs. The conclusion is basically a summary of the essay. A counter-argument is a reason given by your opposition. The counter-arguments are used in thesis to be evaluated on logic and then answered. Transitions are used to connect different paragraphs and give a complete picture of the essay. c. Integration of Evidence: What is the difference between paraphrasing, summary and direct quotes?

Sunday, October 27, 2019

Six Sigma Methodology of Engine Overheating

Six Sigma Methodology of Engine Overheating Problem The Six Sigma is methodology for continuous improvement of process quality, operational excellence and minimizes defects by keeping in mind of customer requirements. The six-sigmas aim is to achieve 1.28 process capability per million opportunities in production, design of product and in administration of products. Adaptation of six sigmas in industry can lead to unrealistic improvement. In this paper the author depicts the use of six sigma methodology for eliminating an engine overheating problem in an automotive industry. Its also explores how company can use that methods and move toward six sigma quality level. The DMAIC (Define Measure Analyze Improve Control) method used by the author to solve an underlying problem for process variation and high rate of defects. After implementing this technique, the author found sand fusion and metal penetration were responsible for jamming the cylinder head. Hence implementation of method results into a reduction in the jamming problem observed in the cylinder head and increased the process capability from 0.49 to 1.28. This improvement had an significant impact on financial statement saving ($US110000 per annum). Â   Â   Process Figure 1: Process mapping for cylinder head core making In this case study the main objective was to reduce of water jacket- passage jamming in the cylinder head of an engine. This problem was tackled by six sigma DMAIC methodology. The cylinder head is the cast product used to produced high power that is produced at the bottom surface of the cylinder head and subjects to high heat and vibration. The water jacket passage is a complex passage for water circulation around the engine. The major problem was jamming the water jacket passage leading to customer dissatisfaction. The root cause of this defects has been identified as sand fusion and metal penetration during casting. Sand fusion defects are held by high temperature molten metal fuses with the mould and core. Metal penetration is due to porosity remain in the cores. Thus, it occurs in 13 location as shown in figure 2. Figure: -2 Location of water jacket jamming The main focused on the following process to enhance the customer satisfaction and reducing COPQ (cost of poor quality) from 0.194 defects per unit (DPU) to 0.029 DPU. Sand preparation Core making process Wash preparation and coating After that authors, have been used DMAIC tool to reduce defects and improve the quality of the product. Each stage of DMAIC (Define, Measure, Analyse, Improve and Control) is explained below. Figure: -3 Five step methodology of six sigma The Define Phase: This is the first step of the DMAIC in which project goal, scope, boundaries and customer requirement are defined. The projects team member includes a champion, a black belt, a green belt and two graduate engineer. Furthermore, the team member asks certain question in charting sessions such that what is wrong in the production of the cylinder head casting? where is the problem? How big is the problem? What is the impact of the problem. The team make sure that these points should be been investigated prior the measure phase. The main goal of this projects was to reduce defects from 0.194 to 0.029 DPU, which immensely decrease in the cost of poor quality. After this the team conducting destructive test on cylinder head and identified root causes and performing brainstorming to an conclusion that the jamming was due to sand fusion and metal penetration. They also conclude that the major roots cause was the porous core. The main focused on the following process to enhance the customer satisfaction and reducing COPQ (cost of poor quality). Sand preparation Core making process Wash preparation and coating The measure phase: In this phase the teams select one or more products specification, mapping the process, making necessary dimensions and establishing a baseline of the process capability or process performance. This will identify all the value and non- value added steps, key process inputs and outputs. After mapping the process the team member proceed to analysis the causes of defects using cause and effects diagram shown in figure 4. Figure: -4 Cause and effect analysis of the porous core Table 1 Causes and effect matrix Its shows thats the process variables affecting the porous core were sand leakage, blow pressure, the AFS number of the sand, the gap in core box and vent choking. After identifying that contribution of porous core is over 80%, they create cause and effect table 1 showing customer needs with respect to process characteristic that are critical to customer. The next step was to define performance standards according to customer demands. A data collection plan has been establishing to track the project output and standard setting exercise. To identify the source of variation in the measurement system a gauge repeatability and reproducibility (RR) study was conducted. Its necessary to redesign the gauge to train operator how to use new gauge and read the gauge instrument and suitable fixtures were used to help the operator for more consistency. This system is used when there is variability less than 10% od the total process variability. This study is performed to check the accuracy of the workers operating the machine. Table 2 Result of gauge RR Study Thus, the result shows that variation is 6.08% which implies the measurement system acceptable as show in table 2. From the data Cpk value is estimated to 0.49, hence it is clearly indicated that the process performance is poor and improvement needed. The analysis phase: In this phase the first step is to gather data from the process to obtain a better picture of the depth of the porous core under different conditions. Later no the data that are factor affecting are being collected over a period of 36 days from different shits as shown in table 3. This data is further analysed to determine the relationship between process parameters direction of improvement. Table 3 Factors affecting response before improvement The passage jamming tendency relation to location is shown in the figure 5 with the help of Pareto chart. This has been drawn on the bases of day to day monitoring and recording the passage jamming at 13 location were arranged in descending order on X axis of the Pareto chart. Figure: -5 Pareto chart to show location wise jamming tendency The main aim of the project team to enhance the process capability by reducing variation in the process. A regression analysis is performed to determine the significance of process parameters. According the table 4. The variation P values less than 0.05 to 0.01 that are sand leakage, bulk density, and vent choking ratio are need to be further optimised and controlled. Table 4 Result of regression analysis for process parameters The improve phase: In this phase using three process parameters sand leakage, bulk density, and vent choking ratio are identified from the analysis phase. Sand leakage When the door half and the ram half were closely packed due to misalignment of the two halves at that time sand was coming out of the core box, after this the two halves were properly aligned and packing were used to seal any opening ends. The parameter may be varied from 10 to 30g/blow. Bulk density The required bulk density of core sand is between 1.78 and 1.95 g/cm3. To increase the bulk density iron oxide and mill scale was added, the iron oxide composition was accumulated to 3% to realize the required bulk density and to improve the high-temperature thermal properties of the core sand. Mill scale addition of 1.5 % additionally helped to extend the density and thermal conductivity of the sand. Vent choking This has been considered one of the serious problems posed by the foundry men. The resin used for the core sand blocked the gap of vent by sticking during the curing process. This results in the occurrence of porous core because from the core shooter air cannot escape out of the core box and only 30 vents were blocked out of 52 vents. Thinner was used to clean this vents. This cleaning was increased from once to twice a week during each shift break. The following steps were taken to control the process. AFS number Proper care was taken of sand so that only sand grain of 65-70 reaches the hopper of shell core machine. Blow Pressure The pressure gauge was checked to maintain blow pressure range of 4-4.5kg/cm2. Baume of wash According the specification standards (52- 56 Be) the was regularly checked. Fin thickness Using corrective maintenance, the fine thickness of range 0-0.85 was brought. Design of experiment (DoE) was conducted using three process and each process was studied at different levels. To have sufficient degree of freedom each trial condition was replicated as shown table 5 the results of the experiments shown average depth of porous core. Hence, the average depth of porous core was 1.25mm. The figure 6, 7 depicts the main effect plot and the interaction plots to relate this it was decided to construct a normal probability plot of effects. Figure shows 6 the main effects were statically significant at 10% level as well as figure 7 suggest light interaction between vent chocking and sand leakage. From figure 6 it seen that the optimum level of the process parameters for minizine all three defect. Thus, the average depth of the porous was computed to be 0. 80mm. Hence, process capability was improved from 0.49 to 1.28. Table 5 Result of full factorial experiment Figure: 6 Main effect plot for the depth of the porous core Figure: 7 Interaction plot showing the interactions among the process parameters The control phase: In this phase the extensive programme was conducted for the case study. Process sheets and control charts were made to take preventive action before the process went outside of control limits. A complete data base was prepared and proper monitoring of process help to detect and correct the signals before they result into customer dissatisfaction. run charts for the depth of porous core were drawn before and after improvements. The purpose of the run charts was to analyse variability in the porous core. Figure 8, 9 shows all the point are in the specification and that variability in the porous has been reduced. Figure: 8 Run chart for the porous core before improvement LSL, Lower specification limit, USL, Upper specification limit. Figure: -9 Run chart depth of core after improvement Table 6 Comparison before and after improvement based on key metrics As shown in table 10 the comparison before and after improvement the depth of porous and various systems has been improved and control by six sigma. If I were the project leader: In this case study, Brainstorming 5 why SIPOC 5S I would like to use all tools. In first step when team is made, it made by only team member so I would like to take one or two members from outside the plants and who are not from this field. By doing this there may be chance to get different ideas from them. Here author did detail study of whole process and found the reasons of problem and best possible solutions. After collecting data, I would suggest team members to find root causes by doing brain storming and also using Ishikawa Diagram. One the other important tool that authors didnt use that should be used is VSM (value stream map) through which we can easily find bottleneck of the process. I would also have used Poka -Yoke (error proofing) tool to easily find error and controlled production of incorrect parts. Just to apply Six sigma is not sufficient to improve process of product but also maintain the quality is one of the important things in any industry. So if I were the in charge of the project I would suggest to sustain the improvements and motivate team to find more better ways of handling problems.

Friday, October 25, 2019

Graduation Speech: Im Ready for High School :: Graduation Speech, Commencement Address

Wow, three years have passed and the last day is just as long as the first. Three years of hard discipline and learning to get used to homework every night. Three years of standing on the front steps waiting for my parents and saying goodbye to my teachers. I never thought the goodbye might be permanent. 6th grade came and I was looking up at those giant 8th graders, and now I guess I’m one of them. 6th grade, and I was saying hello, and now 8th grade has come and it’s gone from introductions to goodbyes as my last days as a middle school student wind down. 8th grade, 8th grade from the opening day to the signing of the yearbooks. This is the year of memories, goodbyes, and regrets. 8th grade and I’m still realizing that there are people in the world that would die to go to a school like this. A school where every body knows everyone’s name, respects everyone, and where violence and fighting are about as common as the Yankees missing the playoffs. When I’m done with my homework and go to bed, as the days of 8th grade wind down, summer will come and go, and I will find myself in one of those giant, scary places called high school. The first time I heard C.R.I.S.P. all I could think of was my mom’s rich apple pies. Now C.R.I.S.P. has more of a meaning. Every day I see C.R.I.S.P. in the hallways and classrooms, not only on the walls but among my fellow students. Everyone wants to help each other out because that’s the way we work here. Everyone tries hard to do their best and be the best person they can be. Looking back on my three years at Twin Cities Academy, I find myself wondering how all these years came and went so fast. I still watch myself walking through the same halls and sitting in the same classrooms as I did back in 6th and 7th grade and I’ve seen myself grow so much, mentally, socially and physically. I still remember everything that has happened throughout my years, the best of times, and the worst. So here I am, not sure if I’m trying to stretch out my final days in a school that has taught me so much, or waiting for a 90-day-straight school-free period. I guess I want to savor these final days with some students that I just met, and some that I’ve known for 3 years because this may be the last time that I see them.

Thursday, October 24, 2019

The Death of a Best Friend

The school hall was quiet. Everyone was silent with their heads bowed down. No one spoke,laughed, giggled or chatted. There was Just sorrow in the atmosphere. Few students could be heard sobbing while the rest Just sat stone dead in their seats. What had happened? What was the cause of this sad and eerie situation? Why did she do it? She had always been that cheerful bubbly girl that everyone loved. Her wide flashing smile could brighten up anyone's day. My thoughts were disrupted when the principal stood up at the podium to give a short speech. â€Å"Today , we all sit here in deep grief and sorrow.Our school has lost one of its brightest student. Her death was indeed shocking and unexpected. And it would be only respectful if we attended her funeral in SST Pewter's church this coming Sunday. The service starts at 9 in the morning and ends at 10. 30. We hope to see each and every one of you there. As for the school , we have made a small altar with candles and pictures of her by th e gym. Students can place flowers and cards of sympathy there. Deepest condolences from East High goes to the family' with that she stepped off the stage. The head prefect's speech brought many students to tears. My eyes felt misty and wet.We were than dismissed. As I walked along the school corridor towards the gymnasium,my thoughts traveled afar. I remembered my first day in East High. I was a newbie with no friends. People whispered when I walked pass by. The mean lads threw spitballs in my direction. No one sat with me during lunch hours. I would lock myself in the washroom cubicle with my tray of food with tears seeping from my eyes. I didn't have any friends. I always wondered what my flaws were. Was I fat? Did I have greasy hair? Or was it because I wasn't a size zero? But then one girl changed everything. She was a newbie too.I was sitting alone at the back of my Biology class. Mr. Trend was having a difficult time putting up with the students. The boys were running about an d the girls were gossiping. And there was me. The loner. It is amazing how a noisy situation changes into a sudden quiet one isn't it? Well that was what happened. Someone walked into class. A new face. She was a brunette with sparkly brown eyes. She wore simple clothing and flashed a wide grin as she walked into class. All eyes were on her as she handed Mr.. Trend a letter. â€Å"Class , we have a new student. Her name is Amanda Grey and she come all the way from Dallas , Texas.Do make her feel at home†. Amanda was given the choice to choose her seat. I noticed her eyes scanning the room and it fell on the empty seat beside me. She walked with confidence towards me and sat. â€Å"Hello , I'm Amanda. Nice to meet you† she said as she shook my hand. My mum had always taught me to greet people with proper manners so I shook her hand back and introduced myself too. All through class, I noticed many students stealing glances in our way. Some even had the nerve to walk up t o our table and tell Amanda that she had made the wrong choice by hosing me as her first friend and sitting right next to me.I had expected Amanda to agree with them and change seats but to my astonishment she stood up for me saying that it was her choice on the friends she made and no one had the right to choose for her. I had an instant liking towards Amanda. She became my new best lunch hours in the cafeteria. Amanda made new friends really fast because of her socially active character. Through her, I got to know people too and began conversing openly without being the old shy anti-social me. Amanda was my other half. I shared everything with her. She was someone I felt that I could open up to and not be afraid of being Judged.Once , she even caught me self harming and throwing up after meals. She took away my razors and made sure I stayed put after meals without going to the washroom. She told me I was beautiful in her eyes and by god's eyes. And I didn't have to be a size zero to be beautiful. She made me appreciate life and realize that there were people who actually cared for me and I wasn't alone. Not only was she great in giving advice, Amanda was a very brilliant girl. She excelled in the studies and always did well in her examinations. She helped me a lot in my studies and my grades which were failing eventually began to improve.My feet made a silent thudding sound as I turned the corner towards the gymnasium. There was quite a crowd around the altar. I stopped midway and stared ahead. My body trembled. And I realized I was alone. There wasn't a happy and Jolly Amanda beside me. The girl who changed my whole life in an instant had disappeared for good. She was never coming back. I approached the altar slowly sinking everything in. There were brightly lit candles around Manta's pictures and flowers were all over the altar. I knelt down ND stared at the pictures. The candles illuminated them with a soft glow.I looked down and pulled out a picture of m e and Amanda from my purse and laid it on the table. It was a picture of the very first time Amanda had a sleepover at my house. We watched a movie while snacking on caramel popcorn, baked cupcakes, did makeovers on each other and took loads of picture. That was the day Amanda had given me a tight hug and promised that she'll always be there for me no matter what. I tear rolled down my cheek. I wobbled slightly as I stood up. I turned away and walked out the school doors towards my home. The sky was a gloomy cast. Look , even the sky was upset about the loss.On Sunday , I remembered my mum shaking me and waking me up reminding me that it was time for the funeral. I wore one of my favorite suit which Amanda had told I looked good in. I took deep calm breaths. I wasn't prepared to see her for the last time before she went six feet under. My dad drove us to the church. There were a couple of students outside dressed in black. We alighted from the car and my mother laid a reassuring arm around my shoulders. We walked in. The place was filled with people and a part of me was happy knowing that Amanda was loved by many. We took a seat at the back.I noticed Manta's mother sitting by the coffin. Her face was blank and expressionless. I felt her. It felt as If I had lost a part of me when I heard the depressing news of Manta's sudden departure. The pastor began the ceremony by singing a few hymn's and citing reading a bible phrase. He went on with the sermon saying how God took the best people at times because he loved them more than we did. â€Å"But she took her own life† a little part of me whispered. â€Å"Why did God let her die when she had so much to live for? † My questions were left unanswered. Finally we came to the end of the ceremony.We were requested to pay our last respects. My heartbeat was racing. This was it. My one and only chance to bid farewell. I walked towards the coffin. Amanda lay in there with a peaceful look on her face. It didn' t look like someone who had committed that she would wake up laughing telling how she had franked everyone. But she didn't. I gently touched her hands. They were ice cold. I than unclasped the necklace around my neck and gently laid it in her coffin. It was my favorite necklace which Amanda really adored. â€Å"It's now yours to keep Amanda† I whispered.Goodbye and I love you† I said as I walked out the church. The sun was shining brightly and the sky was blue. It wasn't a gloomy day at all. The birds were chirping a sweet melody. I looked towards the sky and blinked back tears knowing that Amanda was in a better place. To be honest , Vie never thought of Amanda as a girl who had problems in life. She seemed happy and cheerful at all times. I guess she felt better keeping them to herself rather than burdening others with her problems. She was someone who liked to help others in life. I wish she had opened up and talked about her problems to me.It makes me feel that I wa sn't there for her when she needed me the most or when she was going through rough times. She had told me many times that death wasn't the solution for problems. Now it made me wonder why was it her solution to something. And there goes another unanswered question. A year passed. Soon the date of Manta's first death anniversary arrived. I walked on the soft cemetery grounds. Everything was peaceful and quiet. The grounds were well kept. I made my way towards Manta's grave. There it was. I knelt down beside it and stared at the tombstone. â€Å"l miss you† I said softly as I laid a hand on the cold hard tombstone.I laid the bouquet of roses I had specially made for Amanda on her grave and sat down right beside it. The memories came back. All the fun times with her. Amanda was like an angel sent by God to help me and taken away when her Job was done. I leaned back against the tomb. Some people might have found doing that plain scary. Knowing that your sitting on someone's grave and leaning on a tombstone. But what I felt was a warm feeling. I felt Manta's presence with me. Right beside me. After spending a few quiet minutes there I got up to leave. And to this day , I still don't know why she did it.